CAGED & Voicings
Close Position, Drop 2, and Drop 3 Guitar Chords
Close position places the four distinct seventh-chord tones within an octave. Drop 2 lowers the second-highest voice of that close source by one octave; Drop 3 lowers the third-highest voice. Re-sort the resulting pitches before naming the inversion, because the lowest chord tone can change.
Start with C4–E4–G4–B4
Read the original Cmaj7 pitches from low to high: C4–E4–G4–B4. From the top, B4 is voice one, G4 is voice two, and E4 is voice three. Keep those pitches in mind while comparing the three diagrams.
The close-position diagram lies at frets 12–15. It shows this particular register exactly; it is not a comfortable fingering recommendation for every guitar. Read the pitch lists even if your instrument makes that position awkward.
Cmaj7 · Original close position
C4 · E4 · G4 · B4
Lowest note: C4 · Root position
- String 5 · Fret 15 · C4
- String 4 · Fret 14 · E4
- String 3 · Fret 12 · G4
- String 2 · Fret 12 · B4
Drop 2
G3 · C4 · E4 · B4
G4 → G3
Lowest note: G3 · Second inversion
- String 4 · Fret 5 · G3
- String 3 · Fret 5 · C4
- String 2 · Fret 5 · E4
- String 1 · Fret 7 · B4
Drop 3
E3 · C4 · G4 · B4
E4 → E3
Lowest note: E3 · First inversion
- String 5 · Fret 7 · E3
- String 3 · Fret 5 · C4
- String 2 · Fret 8 · G4
- String 1 · Fret 7 · B4
Drop 2: G4 falls to G3
Lower the second-highest pitch, G4, by one octave. The result is G3–C4–E4–B4 from low to high. G is the fifth of C, so this result is second inversion. The other three pitches have not moved.
Try another original inversion in the Drop 2 tool. The rule remains “second from the top,” but the note that drops may change. Drop 2 therefore does not always mean second inversion; check the resulting bass.
Drop 3: E4 falls to E3
Return to C4–E4–G4–B4 and lower the third-highest pitch, E4, by one octave. Reordering gives E3–C4–G4–B4. E is the third of C, so this result is first inversion. Again, the other three pitches stay in place.
In the diagram, the bass is separated from the upper voices by a skipped string. Mute that string when trying the voicing. Compare it with Drop 2: the chord tones are unchanged, but both the spacing and the lowest pitch differ.
Compare spacing and bass as separate facts
The three versions keep the same four chord-tone pitch classes but distribute them differently in register. Read the actual bass note, name its chord degree, and only then name the inversion. The same logic used for three-note inversions still applies; a seventh chord simply has a fourth possible bass tone.
Cover the result lists and write the two transformations yourself. Check that G4 alone becomes G3 for Drop 2 and E4 alone becomes E3 for Drop 3. Then name the bass and inversion. The three tools show pitches and fingerings without audio playback.
Practice: track one lowered voice
- Open the close-position lab with its default Cmaj7 source. Read the pitches from low to high.
- Open Drop 2 with the same source inversion. Identify the second-highest source pitch and where it moved.
- Open Drop 3. Identify the third-highest source pitch and compare the new bass with Drop 2.
- Repeat with one other source inversion, naming the resulting inversion from the actual bass each time.
References and editorial responsibility
Fretino maintains this lesson and its diagrams. The sources below support the named concepts.
- James Hober: Conversion, Ted Greene V-System (PDF)
Drop-voicing transformations; this lesson's exact Cmaj7 pitches are worked examples.
- Open Music Theory: Inversion
Inversion follows the bass chord tone.